USB Bootable

From RAJ INFO
Revision as of 13:21, 23 September 2012 by Raj (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

How to make USB Drive Bootable

  1. Connect the USB
  2. Under DOS prompt
  3. DISKPART
  4. LIST DISK (now see the USB disk number, it might be DISK 2)
  5. SELECT DISK 2
  6. CLEAN
  7. CREATE PARTITION PRIMARY
  8. SELECT PARTITION 1
  9. ACTIVE
  10. FORMAT FS=NTFS
  11. ASSIGN
  12. Get into DVD drive where you have WIN7.
  13. D:\CD BOOT (and hit enter.Where “D” is your DVD drive letter.)
  14. D:\boot\BOOTSECT.EXE /NT60 E: (where E is your USB drive)
  15. You will have the message
Target volumes will be updated with BOOTMGR compatible bootcode.

E: (\\?\Volume{09f02e66-facf-11de-8c41-001fd0d369d8})

    Successfully updated NTFS filesystem bootcode.

Bootcode was successfully updated on all targeted volumes.
  1. Copy your Windows 7/Vista DVD contents to the USB flash drive.
  2. Your USB drive is ready to boot and install Windows 7/Vista
  3. Change the Boot priority in BIOS

Good Luck Category:Tips

Retrieved from "https://www.rajkumar.in/index.php?title=USB_Bootable&oldid=2711"